• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your valuable possession from theft. This system is discrete and does not require additional key fobs.

The device uses existing buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence up to 20 presses. This will then allow your vehicle to start.

Simple PIN code Change Process

Many homeowners are upgrading their security due to the increase in vehicle theft. There are a variety of aftermarket security devices, from tracking systems to alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. A tracking system can assist you in locating your car if it is stolen however, it won't stop the crime. Immobilisers, on the other hand, does exactly what it says on the tin: it disables the engine of your car so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to steal your car.

By using the buttons that are already present in your car, the ghost immobiliser install device creates an unique sequence that must be entered before the car's engine can start. This can be done using the indicator stalk windows or heater buttons. In addition it is possible to use a mobile app which can function as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This is especially beneficial if you have to hand your car over for valet parking or servicing because the immobiliser will still be activated, but not disabled.

The ghost immobiliser installation is a very unique and ingenious device that is used in conjunction with the buttons of your car rather than being a standalone unit. It's not just an effective deterrent to theft of your vehicle however, it can be used on future vehicles you may own. This makes it a more cost-effective option than a traditional wheel lock.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser is a high-tech security system that protects your pride & joy from key hacking and cloning. It also blocks ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU via the CAN data bus, which disables the engine. It can be placed in the vehicle without the need for additional wiring and has been thoroughly tested to make sure it is compatible with all vehicles. It is also resistant against jamming devices that are a popular technique used by thieves to bypass immobilisers.

The advantage of using CAN data is that it runs silently compared to traditional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by traditional diagnostic tools. The Autowatch ghost doesn't produce LED indicators and instead uses the buttons in your vehicle, such as the steering wheel or centre console panels to create a unique, programmable disarm sequence. You can even create a sequence that is up to 20 presses long to increase security. The iPhone app allows only one connection, with a unique pairing code for the Ghost. All communication between the two devices is secured.

The Ghost also stops car thieves from adding an additional key or replacing the ECU how to become a autowatch ghost installer bypass the immobiliser and start the engine. The engine will only start when a valid PIN code has been entered. It is also possible to put it into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) so that you can transfer your vehicle to a valet service for servicing without the need to enter a pin code.

Every vehicle is tested

The autowatch ghost installation Ghost Installers West Midlands [Gitlab.Sleepace.Com] Ghost is the first aftermarket immobiliser for CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts electronic signals to block the system of your vehicle from going through its normal startup routine until you input the passcode you have created. The system can be turned off or on via your smartphone's app, without the need for additional wires.

Standard factory immobilisers on vehicles function by using a transponder inside the key that sends an indication to the ECU. If the correct code is sent the car will start however, if the transponder is swapped with one from a different vehicle, the immobiliser won't recognize it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser was developed by a South African company at the forefront of vehicle security systems technology. It guards you against key cloning or hacking, and even key theft. Only by physically towing your car away could a thief get it and not be able to drive it.

Ghost utilizes the buttons of your vehicle, including the indicator stalk along with the steering wheel, indicator stalk and door panels to create an unique PIN code that is changeable that must be entered before you are able to use your car. This is not required to use additional hardware, such as key fobs and can last up to 20 presses long. It is also undetectable to diagnostics equipment and doesn't transmit radio frequency signals so thieves are unable to use sophisticated RF scanning or code-grabbing technology to determine if the security system has been installed.

Ghost is harder to remove than car alarms, which require disarming with several buttons. This makes it a perfect supplement to a GPS tracker, which can help locate your car after it's been stolen.

Override of emergency PIN code

You don't have to look far on social media for stories or videos of vehicles that have been stolen with the most advanced technology tools. This includes key-cloning and hacking devices that allow the vehicle to start without the original key fobs.

Our ghost 2 immobiliser fitting near me immobiliser combats this and provides you with an additional layer of protection to stop your vehicle from being stolen in the event of being targeted by thieves. It is created by creating a unique pin code push sequence using the buttons you have on the steering wheel, door panel, and the centre console. The unique pin code is entered in conjunction with your original key fob to stop the engine from getting started. The unique override PIN can be found on the black card that you will receive following installation. It's easy to remember as there aren't any LEDs.

The device is hidden within the vehicle's wiring and doesn't emit any radio signals, so it can't be detected by modern thieves using diagnostic software that is able to identify the security system you have installed. This makes it an excellent alternative to a tracking device.

Unlike other security systems, which rely on a relay in the engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to block a vehicle completely by sending a digital block to the ECU and engine.

They can also be connected to a separate analogue alarm immobiliser, tracker or alarm. This should be specified prior to the installation. They are also service/valet mode-compatible and a great alternative to a tracker when having your car in for repairs to an electrical issue at the dealership.

Service/Valet mode

In recent years there has been an increase in the number of vehicles that are stolen without owners' keys. It's now more easy than ever to steal your pride & joy thanks to the availability of key cloning devices and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It stops your vehicle from being driven even if your keys have been copied.

It communicates directly with your car's ECU (Engine Control Unit) via the CAN data loop. It is completely silent, as it does not use radio frequencies or key fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also stops the user from using an ECU or key to circumvent the system, since only the PIN code allows the engine to be started.

The device is hidden within your car using existing buttons on the steering wheel, the centre console and door panels. A unique and reversible PIN code sequence up to 20 digits needs to be entered before you are able to start your vehicle.

This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car being started or driven away in the event that a PIN code hasn't been entered prior to. If you're driving away with the device arming the indicator will flash on your dashboard and flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your vehicle will continue to operate normally. If you don't enter your PIN at this time the indicator will continue to flash and require a new pin code every time you attempt to start your vehicle.