• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum or timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor, where they could be trampled under.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional comes out and fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. Over time, they can develop a variety of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window which is sliding. To accomplish this, you'll have to open the window so that you can get to the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in the right place.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are watertight and secure from draughts.

UPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it could also be caused by the handle mechanism wears out. Fortunately, it's easy to repair the loose upvc window repairs near me window handle yourself. You'll first need to close the window and perform a test fitting. The corners of the sash need to align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is essential to take action if wake up every morning to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the problem the caulking that was used up may require removal before a new layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leakage originates from the glass in your double glazed window repairs near me glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens in a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have either top hung or side hung upvc window repairs windows that have hinges and like any mechanical part they can wear down over time. Changing a window hinge is essentially a very simple process, but it's easier with someone else to help hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or by improper installation in the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be more than happy to give you advice.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. Firstly the hinges, again due to wear and tear can become misaligned, this can cause an opening to appear between the sash and the frame. If they are damaged beyond repair, it might be necessary to have them realigned. The interlock may be misaligned. This is located on the hinge side and could require to be cleaned. In certain instances it might be necessary to replace these.

These seals can wear down or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures and lessen the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking out cold air.

With a little maintenance and repair, your upvc windows will provide a great level of security and insulation for your home. It is important to remember that all windows eventually get worn out and it is cheaper to replace them than to repair them. So, if you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.